TS10 Serie

◆ APPLICATION:
　　Type sh pumps are used for pumping clean liquids containing no solid particles and its temperature not more than 80℃.The standard performance range:

Capacities: 112～6250m³/h
Heads:H:9～140m
Allowed suction pressure ≤0.3MPa(suction nozzle pressure must be indicated in order)

◆ CONSTRUCTION:
　　Type sh pumps are designed with horizontal, split volute case and with single-stage, double-suction impeller. Since the suction and dscharge nozzles are cast integral with the lower half of the case, this construction ensures easy dismembering to inspect all rotor parts without distutbing pipelines and motor.

◆ SHAFT SEALING:
　　Soft-packing or mechanical seal are adopred for shart sealing. The shaft is protected by renewable sleeve.

◆ BEARING AND BALANCE:
　　The bearing horsings(rolling bearings or sliding bearings)are arranged on both ends of the pump shaft.
　　The axial thrust is balanced by double-suction impeller and the residual axial thrust is absorbed by rolling bearing.
　　The rolling bearings are lubricated with grease and the sliding bearings lubricated with thin oil.